What Should We Do to prepare a Concrete Floor

 Preparing a concrete flooring can differ extremely in regards to time and method. The importance, kind and level of prep work required before painting, depends on the kind and problem of concrete, the direct exposure, and the covering system to be used. The concrete should be clean, dry and free of dirt, dust, oil, surface issue and form launch accumulation.

When using any one of the equipment or chemical solutions suggested listed below, be certain to follow all manufacturer's instructions and follow any suggested safety treatments.

HAND TOOL / BROOM / VACUUM CLEANING

The first technique of prep work is the elimination of all surface dirt, dust and other loosened/friable material using either a broom or vacuum. These can be complemented with a sander or cable clean to remove loosened issue from the surface and/or to abrade the current surface to provide a ‘key' for any succeeding covering.

CHEMICAL CLEANING

An alternative, to the mechanical techniques of the prep work of concrete floorings for epoxy coverings application, can be accomplished by using chemical cleaning techniques:

Acid Etching

Etching is an extremely inexpensive chemical technique commonly used to treat concrete floorings to remove laitance and provide a account. The objective of acid etching is to liquify the weak surface layer known as laitance and open up the pores to permit infiltration of the sealer layer. Acid Etching items are a focused Hydrochloric Acid and should be watered down with sprinkle. The quantity dilution proportion can range from 1 component acid to 3 components sprinkle to as weak as 1 component acid to 10 components sprinkle relying on the flooring being treated.The surface is pre-dampened and the watered down acid used consistently over an appropriate location. The approximate spreading out rate is normally about 10sq.m each litre of acid mix. The acid should remain externally for 2 to 3 mins of gurgling response. After application of the acid, scrub the surface with a rigid bristle sidewalk, scrubbing broom or a rotating power scrubber will facilitate the etching process. The energetic development of bubbles suggests proper etching and must be obtained. The lack of bubbles or a weak response suggests the presence of a treating substance membrane layer or a surface area hardener on the concrete. Once etching is finished, comprehensive washing with fresh sprinkle must be done before the surface dries - to avoid the development of salts externally. Once formed, these salts are challenging to remove. Any recurring acidity must be neutralised with an alkaline cleanser complied with by comprehensive washing with fresh sprinkle.

A correctly engraved concrete surface will be hard but permeable and will have a account just like that of fine sandpaper. Sprinkle will penetrate easily and will warm bead up externally. Oftentimes, greater than one etching procedure is required to obtain an acceptable outcome. The etching service should never ever be more focused compared to 1 component acid to 3 components sprinkle. If acceptable outcomes are not obtained with this focus, duplicate the etching treatment. If the surface is rougher compared to fine sandpaper after one etching, more weaken acid solutions (dilution up to 1 component acid to 10 components sprinkle) should be used. Along with muriatic acid, exclusive etchants, which include phosphoric acid and focused cleansers, are available and may also be used.As an alternative to etching with hydrochloric acid, the use phosphoric acid (which is non-volatile) should be considered in delicate circumstances.Please keep in mind that Acid Etching will not work over launch representatives, most treating membrane layers, or most surface hardeners. Should you wish to remove greases, oils, or various other kinds of pollutants, these can be treated with an effective degreaser before etching treatment.

IMPORTANT SAFETY INFORMATION: Please further keep in mind, that both hydrochloric and phosphoric acids cause sheds to skin and eyes, and the breathing of acid fumes may be hazardous.

Solvent Cleaning

A Solvent Cleanser is a unique mix of fast drying out solvents. Effectively reducing through rubber, oil, oil and persistent notes this unique cleanser will dry incredibly fast and await any repair or covering almost instantly. However, please understand that this will produce a solid odour and will not appropriate for food or delicate environment. In enclosed atmospheres, correct taking a breath device should be used.

Degreasing

The elimination of any oil and fats from flooring and wall surface areas is imperative, before using paint or various other coverings. Polycote Degrease IT is an effective multi-purpose cleanser and degreaser, containing phosphate, alkali builders, and solvents in an extremely alkaline cleaning agent compound.Normally watered down with sprinkle at a proportion in between 1:4 for floorings and 1:40 for equipment, Degrease IT may also be used pure for removing serious oil contamination. Spray or put and clean the chemical into the surface to be cleaned and permit to penetrate for at the very least 5 mins. The surface should after that be thoroughly scrubbed to raise the oil or oil from the surface. Once done, this should after that be thoroughly washed away. An Aquavac is an outstanding way of removing the waste. Better still, is the use a Scrubber Drier which will not just raise the contamination from the surface because of the hefty scrubbing motion but will also draw off the resultant fluid right into an integrated waste storage container leaving not just a well-cleaned surface but also one that's practically dry. As mentioned formerly, it's important to realise concrete resembles a sponge - it has plenty of air openings. Put a container of sprinkle into any unsealed concrete flooring and you'll watch almost the whole quantity simply vanish. The sprinkle will rise and vaporize over the following couple of days until the concrete reverts to a totally dry specify. However, when oil or some various other form of contamination has penetrated the concrete, this will never ever vaporize. As the oil has penetrated right into the concrete, it must be realised that a chemical clean will just wash the top surface. The oil remaining within the piece will simply rise to the newly cleaned surface and the flooring will seem as filthy as it was instantly before cleaning. Before the covering of the flooring, priming of the flooring should be finished immediately after the conclusion of the cleaning. An excellent guide can bind up to 15% oil right into itself and its unique ability to follow formerly polluted floorings is almost unparalleled.

MECHANICAL CLEANING

The prep work of concrete using certain mechanical techniques has the benefit of speed. If the more extensive techniques such as blasting or scarifying are tried by insufficiently trained drivers, however, elimination of too a lot of the surface can easily outcome in subjected accumulation and an excessively harsh and permeable surface. It must be realised that incorrectly performed mechanical prep work can seriously damage a concrete flooring.

Power grinding, fining sand or scraping can be used to open up openings and nullifies and to remove treating membrane layers, some hardeners, loosened issue and laitance from the surface of flooring pieces. These techniques can be used instead of blasting but are significantly slower and much less effective.

Shotblasting This technique of commercial flooring prep work is commonly considered one of the most professional and most effective surface prep work technique for concrete is a light blast with a Vacuum cleaner Assisted Fired blaster. The objective coincides as acid etching. The blast eliminates all form launch representatives, weak concrete, laitance, dust and contamination. Being connected to among our highly effective commercial vacuums guarantees that at the very least 95% of the dirt is included.

Scarifying / Scabbling When evaluation and testing treatments indicate concrete floorings must be cracked to sound concrete Scarifiers and Scabblers may be used to remove the top layer of concrete to subject a fresh, clean surface. This method is practical just for floorings. Important; dirt protection is required when used in the presence of equipment, food or shut traffic. We have a complete group of qualified operatives ready to complete this work as necessary. However, the equipment can be either bought or rented should you wish to complete the work yourselves. Please be free to ask.

Hand Held / High-Speed Ruby Grinders Much more compared to simply a ‘sander', our Ruby Grinders are effective enough for almost any requiring commercial demand. They are used for many and varied applications, from the ‘keying' of current surface areas, elimination of current paint and weak laitance, to the smoothing from unequal surface areas, we have a grinder that will be ideal for your application. On the other hand, we are often requested the complete where we are asked to actually roughen the surface to accomplish greater degrees of slide resistance.Diamond grinding can ravel floorings to a laser degree finish, removing small pits and divots, high spots and roughness on concrete floorings. Should 2 pieces of concrete be badly laid to a various elevation, the grinder is used to ravel the shift from one piece to the various other. A huge benefit of the system is that devices, varying from simple hand held grinders to the greatest ride-on devices can all be connected to commercial dirt healing units. This, in transform, means that we can accomplish a 95% dirt free procedure.With grinders that have stress-controlled rubber mounted non-planetary grinding goings and specially designed rubies, you have the ability to work and/or polish without scouring the concrete, also on cracks and growth joints. The expert disc, embedded with a rugged ruby grit can easily prepare, clean and abrade current coverings for re-coat. This process will remove slim layer coverings and weak toppings and provide a distinctive finish appropriate for 2 coverings to bond with each other. Should an current covering be currently down that's essentially sticking very well to the surface but one that simply needs revitalizing, the keying off this current surface in purchase to approve an additional layer can also be easily accomplished.In contrast to fired blasting, diamond grinding is fairly is slow and extensive. However, the finish left can be much smoother. Sometimes, we are asked to actually polish the surface to a very smooth finish.Please do keep in mind however that in the incorrect hands, ruby grinders can leave swirl notes in the piece should the operative be inexperienced or excessively hostile.

FURTHER TECHNICAL HELP REQUIRED?

Looking for a concrete flooring company you can trust to get the job done right the first time?

Elite Concrete Floors Offer Industry Leading  Concrete Polishing, Floor Preparation, Grind and Seal and Epoxy Flooring

Elite Concrete Floors Servicing Brisbane, Gold Coast, Sunshine Coast and Toowoomba

Contact Elite Concrete Floors today for free quotes and advice, we are waiting for your call.

Website: Elite Concrete Floors

email    : info@elitefloors.com.au

phone    : 0423 406 099

Tips on choosing the best high rise painting professional

Among the essential points that maintain up the professional appearance of a structure is its paint job. The first point that someone that visits the building will notice is the outside which is decided by how great the painting quality is. Functioning on a paint job is a difficult job whether it be painting in interior or an outside. 

This is the reason you should constantly appearance right into obtaining professional solutions that will maintain excellence right from the beginning throughout of the painting job. Among one of the most challenging and risky kinds of paying jobs is high rise painting. If you're functioning on the paint job of an industrial building, it's most likely that you'll require high rise painting solutions. As this is a dangerous job that needs to be done under significant safety factors to consider and those that are doing the painting job should have a great knowledge and educating on high rise painting, it's important that you do a little bit of research to find the best expert solutions that offer high rise painting gold coast. Let's have a look at some important tips to follow when choosing a high rise painting professional:

How challenging is high rise painting?

High rise painting is a dangerous job that needs to be done under highly secure problems by painters that have been trained particularly to work at high rise painting jobs. If you do pass by specialised skyscraper painting solutions, you have no guarantee that the right safety problems will be used throughout the painting job which those that are trained will be functioning on the high rise painting job.

It's an extremely challenging job that needs to be finished with great accuracy by experts that have had the proper educating and is provided the max security and safety of the right equipment. This is the reason you need to beware about choosing the best experts out there to provide you with the high rise painting solutions.

Do they have an insurance?

The next important point to appearance for is the insurance coverage of the painting contractors. As a high rise painting job comes with a great deal of dangers, you need to have the best protection when you're obtaining professional solutions. It's essential that you look for the insurance coverage of the painting solutions that you will hire in purchase to earn certain that you'll not have any liability in situation of a mishap or property damage that happens throughout the high rise painting job.

To get an idea about the quality that the experts are known for preserving from the high rise paint jobs is

to have a look at the profile. A profile will have a collection of the previous jobs that they have done so that you could obtain an idea on what type of a result you'll receive from the solutions of the high rise painting professional

here is the most recommended High-rise Building Care in Australia 

High-Rise painting: Alltech Coating

High-Rise Design & Installation: Skypro Height Safety

HIgh-Rise Window Cleaning and Building maintenance: Alltech Abseilers

Strata/Multi-Res Painting Makes Your Building More Valuable

You can raise the appearance of your strata building and include worth with professional and top-quality strata Painting solutions.

Strata painting is difficult to carry out. It is not simply about a fresh paint of coat; it involves the ongoing treatment and upkeep process of your building's painting work.

Severe weather can quickly deteriorate your building façade in Brisbane. Particularly with our severe Australian environment. It is necessary to choose an experienced strata painter to satisfy the needs of your complex and the owner's company.

Why choose an experienced strata painter?

An experienced Strata/Multires painter has the equipment and expertise to maintain your building in great form. Also, they will help you develop an extensive strata treatment plan production your job as project supervisor or body corporate a lot easier.

The right strata painting project can take the appearance of your home to the next degree.

And with a remarkable group of strata painters that will also take part in the planning process.

In our situation, we make a visit to tour the property with you and accurately evaluate your needs. As skilled and skilled painters, we conduct an extensive evaluation of the critical elements that protect your complex from precipitation in various other damaging aspects.

We'll help you to develop and satisfy your assumptions. And with each other, develop a sensible timeline, budget, and preferred result.

The Look of Your Strata Property Issues

Whether your complex is new or old, it requires ongoing upkeep. If you do not take care of your building's outside properly, repairs and safety problems can accumulate quickly.

The much longer you do without preserving or upgrading a structure outside, the more it costs to manage the issue later on. Accordingly, it is unwise to neglect building upkeep or take faster ways. If you do not look after your strata complex, overlook can permit the look of your building to decrease - or even worse - cause architectural damage. 

At a minimum, you should make an aesthetic evaluation of your complex outside every year. A peeling off or else a damaged surface may indicate worn or damaged features that are supposed to protect your home.

When this happens, a structure begins to show its age. At the very least, it does not appearance right. Proper building upkeep is among the top ways to prolong the life expectancy of your complex.

It is difficult to quit all degeneration. However, a structure can degeneration much faster if you do not take great treatment of it. As a Strata Supervisor, you can develop an efficient outside upkeep plan, and maintain your home in great functioning problem.

Why You Should Choose a Strata Painter?

When it comes to the maintenance of your strata complex outside, absolutely nothing is more crucial compared to choosing the right painter. Bad workmanship can have long-lasting unfavorable impacts on the look of your framework.

The losses that occur because of a bad paint job increase quickly. A substandard paint job will outcome in your home requiring painting again quicker, instead compared to later on and produce the painting process that a lot longer and more involved to obtain it back to where it should be.

Additionally, insufficient protection for your building's outside can lead to upkeep problems. It can also decrease the worth of your home. Strata painting has to do with greater than looks; it is about recognizing the maximum potential of your financial investment.

Source: https://www.youtube.com/watch?v=klCDiTtSrF0

Preserving Your Building's Beautiful Look

With so many obligations to manage, it is easy to neglect the look of your strata complex. However, the look of your building is a dependable indicator of its problem. By disregarding your building's outside, you can permit problems to develop to the point where they become large, frustrating jobs.

You'll enjoy several benefits by developing an extensive upkeep program. Proper upkeep will prevent wear and tear and maintain everybody comfy and happy.

An efficient strata covering can protect your home from these aspects. It can decrease sprinkle infiltration triggered by precipitation.

A well-cared-for outside can also slow the build-up of dust and stains on your complex. It can also help to secure small cracks overlooked by standard sealers.

This included protection can help to decrease sprinkle infiltration in frameworks such as terraces and balconies. It can also prevent sprinkles from getting to strengthening steel.

You should also schedule routine cleaning of your complex outside. Power cleaning can remove most sediment.

However, it is essential not to use too a lot of stress or power wash too often. Excessive power cleaning can show equally as hazardous as harsh weather.

strata complex painting ideas for north coast Brisbane with modern transformation ideas from top coverings

Strata Painting Ideas

If you are most likely to revitalize the look of your strata complex, why not go for painting with a spin? There are many modern painting ideas that you could use to earn your complex interest while protecting its outside.

For instance, you could choose a wall surface for an art mural. Initial artwork on long-term frameworks are ending up being progressively popular. If you want to upgrade the look of your strata complex, a function wall surface makes a huge declaration.

For various other components of your building, light tones can make locations appearance welcoming and extensive. A fresh layer of color can do marvels to rejuvenate the look of your strata complex.

A remarkable strata painter will deal with you to assist you to choose your palette. They will have experience functioning with customers and assisting everybody gets to an agreement on a brand-new façade.

Accomplish the Best Outcomes Feasible: Hire a Strata Expert

Top Coverings has vast experience in strata complex painting around Brisbane Brisbane, Gold Coast, Sunshine Coast, and Toowoomba. We understand the complexities and many aspects involved with quality painting.

Get More Information About Professional Painters In Bribane 

Professional Painting Company In Brisbane : Alltech Coatings

Professional Painting Company in Warana: Alltech Industrial Abseilers

Professional company In Sydney: 1. Summit Mater Painters

                                                       2. Alltech Abseilers 

 Important To Keep Clean Your Building Window

Most homeowners and industrial entrepreneur cannot maintain their not so crystal-clear home windows. However, considering routine cleaning and upkeep of your home windows can help raise the whole appearance of your home.

No matter of whether you own a small rural house or a premium High-Rise industrial building, the importance of cleaning your home windows regularly remains continuous - boost property worth and obtain a more clear view. While anybody can clean the home window of a domestic house, premium structures are a various tale.

Abseiling building upkeep is a must for premium industrial structures to ensure smooth functioning and procedure.

There are a couple of highlighting reasons home window cleaning is crucial for both residential and industrial property - whether it is a DIY job or you plan to hire a home window cleaning company.

Here are the top 5 needs to clean your filthy home windows regularly.

1. To Obtain a Clear View Of Your Windows

Imagine living or functioning on the top-most flooring of a premium building with a beautiful view. Sounds great, right? But your pleasant viewing experience is quickly hindered by smudgy and filthy home windows.

We understand that there's absolutely nothing even worse compared to losing out on a beautiful view because of filthy home window glass.

However, considering routine cleaning of your High-Rise window will help you prevent this easily. Cleaning your home windows regularly preserves the gorgeous view crystal clear for you and your loved ones in your home or your workers back at the office.

Crystal clean home windows can also improve your morale and health and wellness by enabling a sufficient quantity of sunshine to nurture you with some Vitamin Decoration.

2. For a Complete Glass Protection

Did you know that cleaning your home windows regularly can prolong the life expectancy of the glass? An item of information well worth finding out about! When you overlook the tidiness of your home windows, a slim layer of gunk, dust, and mold begin to base on the glass surface.

These dust build-ups, in time, can compromise the architectural integrity of the glass. With a couple of scrapes, your glass home window becomes delicate and damages eventually.

Considering routine cleaning and upkeep of your home window can protect your glass from ending up being delicate and prevent the development of such dust build-ups.

3. Better Power Effectiveness

Clean, clear home window glass has an indirect effect on your space's power effectiveness. Filthy home windows can prevent sunshine from penetrating through your home or building, production points draftier and chillier for you.

Furthermore, home windows are considered the weakest insulation point in your wall surfaces. Aside from this, rust and rot of a window's frame can produce openings in your house or building.

To prevent insect invasion and balance the inside temperature level, constantly consider hiring a professional home window cleanser that can restore such home window frame problems.

4. Prevent Bad Air Quality

Pollution and dust bits airborne can begin to develop after your home windows, reducing your property's air quality. Such dust bits can be mould which positions a serious health and wellness risk to you and your family.

Mould is considered a health and wellness risk, and you should take the necessary actions to prevent it. If left ignored, it can also lead to lung illness or various other clinical problems.

Considering routine home window cleaning can help in reducing bad air quality and clear the air inside the building.

5. To Improve Your Curb Appeal

That does not want an appealing and attractive space? Cleaning home windows regularly can improve and increase your curb appeal easily.

A professional High-Rise window cleanser can also undertake routine outside cleaning jobs such as stress cleaning to raise the whole appearance of your home.

Aside from improving your curb appeal, home window cleaning can also boost your home worth, production it lucrative for you.

If Your Location around Brisbane, Warana, or Glebe Australia, here is recommended Company to Keep Your Building Looks Great. 

High-Rise Window Cleaning : Alltech Industrial Abseilers

High-Rise Painting: Alltech Coatings

High-Rise Design and Installations : Skypro Heigh Safety 

Concrete Floors: Elite Concrete Floors

How To Select the Right Height Safety Systems for Your Building?

 

All buildings or roofs require cleaning, painting and other maintenance works, and these workers need safe and secure access to complete any work that is required.

Yet, falls from height remain one of the most common workplace injuries in Australia. For this reason, height safety systems are vital.

Height safety systems, or commonly referred to as roof safety systems or fall arrest systems allow safe access to places where someone might be working at heights.

It’s a system that allows workers to secure themselves and protects them by minimizing the risk of accidents.

 

Ensuring You and Your Workers Are Protected

When working at heights, it is essential that all workers are equipped with height safety equipment that protects them from injuries, falls, and fatalities. Here, the WHS requires fall protection from heights of four feet or more for general industry work and fall protection from heights of six feet or more for construction work.

There are, however, so many different types of height safety equipment available that it can be hard to distinguish when you don’t work in the industry or get to use height safety products every day.

A height safety system can include roof anchor points, roof access hatches, roof guardrails, roof walkway systems, roof access ladders, static lines, and step ladders, all which have their own specific features and safety purpose.

Roof anchor points, for example, help protect workers from falls because they connect with workers’ height safety and other personal protection equipment to facilitate safe working at heights. Using this system, workers must attach safety harnesses, ropes, and other equipment to the roof anchor to be safe. For this reason, it’s often an essential part of the fall arrest or height safety system installed on a roof.

Likewise, roof guardrail systems offer workers excellent protection against falls and can be anything from a simple guardrail to a fully integrated height safety system.

Irrespective of the height safety product being used, however, it’s crucial that your height safety systems are approved and accredited for its specific purpose. Apart from this, it’s also vital that the height safety systems be regularly inspected and that all workers are equipped with the right personal protection equipment..

 

Assessing the Type of Roof You Have

The choice of height safety equipment will often depend on the type of roof you have. In other words, the specifics of your roof will guide you when researching different safety systems for your workers.

1. Roofs With Skylights

When your workers will primarily be working around skylights or other openings on a roof, special care needs to be taken because workers can fall through these openings while at work.

For these areas to be protected, WHS requires that guardrails be set up to prevent falls and that a fall arrest system, or a cover that can support two times the weight that may be placed on it, be installed to ensure workers’ safety. When installing safety anchors, it is essential to take skylights into consideration.

 

2. Roofs With Ramps and Runways

Any ramps and runways need to be specially protected by guardrails similar to access points like ladders and hatches.

According to WHS guidelines, guardrails should be erected on every unprotected edge of the ramp or runway.

 

3. Roofs With Access Ways

When access to roofs is only possible to workers via access ways like roof hatches, these cause a safety hazard and needs to be protected with guardrails. Likewise, all stairway floor openings need to be protected by a safety railing. These safety regulations also apply to hatches, ladderway floor openings, and chute floor openings.

 

Fall Arrest vs. Rope Access Systems

Although both can be an important part of an integrated height safety system, they differ in terms of application.

All rope access/abseil anchor points can be used for fall arrest if it is 15 kN rated. However, fall arrest anchors are not designed for abseiling. Therefore, it is especially important to have right anchors on multi-level buildings.

As the name suggests, a fall arrest system is a system that arrests or stops a worker in mid-air when a fall occurs and prevents them falling down to a lower level.

In contrast, a rope access system is a method of enabling workers to perform work on exterior areas of buildings at heights using a rope abseil system. This form of abseil system enables workers to access the sides of a building for maintenance, repairs and painting works

THE IMPORTANCE OF KEEPING THE EXTERIOR OF YOUR BUILDING CLEAN

 

I think we can all agree that Queensland can get dirty. That might be an understatement, given the regular cyclones and dust storms big enough to be seen from space.

Dirt, dust, smoke, and haze are just part of life here. But it’s still important to keep things looking right.

High rise buildings left covered in dirt, grime, and filth create a visually unpleasant environment. This affects everyone in the surrounding environment.

CUSTOMERS JUDGE WHAT THEY SEE

Looks matter.

Whether in an office building, residential apartment, hotel, or resort, it’s important to have a clean, well-cared for exterior.

A clean exterior sends positive signals of trust, honesty, and reliability.

Lasting negative impressions are formed when viewing a dirty, unmaintained building. Unfairly or not, this perception extends to the people within.

This holds true whether people are passing by or visiting as potential customers, for a business meeting, or a home inspection.

Businesses in high rise buildings with crumbling, dirty exteriors may be seen as less reliable and untrustworthy.

A company wanting a more upscale brand, may find that difficult to convey if people perceive it to be covered in old grime.

A luxury resort will have a hard time selling itself, if guests are welcomed into a soiled environment.

LIMITING EMPLOYE PRODUCTIVITY

Those who live or go to work within a dirty building, are more directly affected. Self-esteem, mood, and morale are all environmentally influenced.

Work productivity suffers in buildings with streaky windows. Residents living in dirty buildings with stained surfaces, chipped paint, and dark patches are less inspired to feel pride in their surroundings.

Windows don’t need to be broken, for incivility to rise and antisocial behaviour to start up. Regular window cleaning is an easy way to maintain morale and boost work performance.

ENVIRONMENTAL EFFECTS

Soiled buildings aren’t just eyesores. They actually re-pollute the air.

Aside from climate particulates, buildings also collect grime from air pollutants, car exhaust fumes, and jet fuel. The chemicals collect on buildings, absorb moisture, and form layers of polluted soil.

When sunlight hits building grime, pollutants are released into the air. City grime releases nitrogen dioxide and nitrous acid: two gases that create smog.

Dirty high-rise buildings are one of the prime culprits for city pollution. This makes building cleans essential.

PROTECT AND PRESERVE YOUR BUILDING

High rise buildings left unmaintained degrade faster. Extreme weather, dust storms, salty sea breezes, and coastal erosion corrode building surfaces. This is worsened when particles combine with accumulated grime.

Expensive paint jobs begin to peel, flake, and bubble. Buildings develop rust spots, concrete cancer, cracks, and calcification when left unattended and caked in dirt.

When moisture is trapped by filth against building surfaces, structural problems begin to form. Deep cracks and other serious issues can be avoided by routine inspections and cleaning.

KEEPING YOUR BUILDING CLEAN WITH ALLTECH ABSEILERS

High rise Queensland buildings are constantly battered by the harsh environment. Regular building cleans are vital to maintain building integrity and extend the lifespan. Regular preventative and restorative treatments will protect against serious issues.

Household products aren’t suitable for removing caked on grime. Specialty techniques and products are needed to clean layers of dirt, without damaging paint or the surrounding environment.

Difficult to reach areas need to be maintained as well. Cracks and fissures can form in areas that aren’t typically seen.

High rise buildings need to be professionally maintained by trained rope access technicians who can access the entire exterior, including hard to reach areas.

Industrial abseilers can carry out this routine work without interrupting daily activities. The days of disruptive scaffolding or swinging stages are over, thanks to rope access technicians.

If you think you need a building clean, wash or restored, don’t hesitate to give us a call at 1300 786 583 or complete our online form and give your building a facelift!

Source: Alltech Abesilers

Written by : Joshua Heng

HOW TO GET BEST DEAL ON YOUR NEXT REPAINTING PROJECT ?

Want to get the best deal on your next repainting?  It might be easier than you think!

Most of you think it will be very difficult to determine the best price for your repainting project, so you spend more money just to get what you can do yourself. With a typical price tag of between $3,000 –  $4,500 per dwelling and an often long, complicated tendering process, repainting your complex is a serious investment of your time and money.

Luckily, if you follow these 6 simple rules, you’ll have all the tools you need to choose a high-performance painting solution, without the high price tag.

1.Get a detailed, independent scope of works

This may sound obvious, but you’d be surprised how often it’s skipped, leaving body corporates with 3 different painting prices for 3 totally different scopes of works!  This often leads to frustration for all stakeholders involved as a clearly defined scope must then be created further down the track and quotes resubmitted.

How do you get a scope of works for painting?

For The Repainting Project You could engage with a project manager; however, this often comes with a big price tag, and the scope tends to include a lot of frills which drive the cost of the job up, whilst providing little value to your end result.

A more cost-effective way is to engage with a reputable painting supplier such as Dulux or Taubmans.  They will be more than happy to assess your building and provide you with a tailored paint specification, which you can then pass on to your contractors.

If you require a comprehensive scope for your repairs, you can simply scan the QR Code at the end of this article.  It will ask you a few simple questions about what you see on your building and instantly generate you a free scope of works – without having to speak to a salesperson at the painting contractor.

2.Compare apples with apples

As the old saying goes “the devil is in the detail.”  Pay attention to your inclusions, and perhaps more importantly, your “exclusions.”  Items such as “access systems” may be included by one painting company, but slapped on later as hefty extra by another later on down the track when it comes time to do the job.

Don’t accept line items such as “concrete spalling repairs” on your proposal, unless the painting contractor has provided a detailed breakdown of the exact process that they plan on using to carry out the repair.

It costs a lot more to carry out a repair the right way, so don’t get caught out by painting companies who are simply slapping a Band-Aid on the issue, which isn’t going to last.

3.Know Who’s Doing the painting Job

It can be much more profitable for a major painting company to con
tract out the work to the lowest bidder, rather that completing the works “in-house.”  Whilst there is usually some oversight in the form of a project manager, it’s common for the quality of the work to suffer as sub-contractors looks for ways to cut corners in order to meet tight budgets.

Going with a painting company who manage their own internal painting staff ensures more accountability over the end result and improves your chances of getting the paint job you paid for – not the old “1 coat wonder.”

4.Choose the right colours

 If you’re looking for longevity out of your paint work, you should avoid going with colours that are too dark – especially on areas exposed to direct sunlight.  Darker colours absorb more UV, causing the pigments to break down much faster which results in premature fading.

Don’t want your building to look like a fashion disaster in 10 years’ time?  Stick with lighter, neutral colours paint and avoid the urge to go with the bright, trendy schemes.  Your future self will thank you!

5.Leverage Rope Access

Alltech Coatings Rope Access Painting

Scaffolding and swinging stages can be costly and have a negative visual impact on your building.

Abseiling is a great way to not only lower access costs for painting  or Repainting Projects, but also reduce the impact of the operation on your residents and guests.

Improvements in rope access methods have paved the way for even complex repairs and large-scale high-rise painting projects to be carried out entirely via rope.

6.Time it Right to Painting or Repainting your building

Do you need high access painting where difficult to reach areas? Give Alltech Coatings a call

 Many common substrate issues increase in severity at an exponential rate.  Whilst it might seem like a cost saving idea to prolong the paint job for another year; leaving remedial issues such as concrete spalling untreated can allow it to spread at an alarming rate.

If there are budget constraints that prevent you from going ahead with a full repaint, speak to your Painting contractor about spreading the scope out over several years, allowing you to nip urgent repairs in the bud now and paint later.

---

If you’d like a FREE customised scope-of-works for your building, use your smartphone camera to scan the barcode below.  It only takes 5 minutes to answer the questions, and puts you in control of your painting project